Archive

Category Archives for "Home Interior"

Water heater pilot won’t stay lit – 6 reasons. How to Fix?

Nothing irritates someone like rushing to take a hot bath in your bathroom only to find that your shower head is giving you cold water. There are many reasons which could lead to this, and therefore you need to scrutinize the water heater and ensure its operating effectively. For instance, you need to check signs like if the water heater pilot won’t stay lit and therefore, troubleshoot the problem.

However, there is an instance where your gas heater won’t stay lit, and this could lead to a more problem than only taking a cold bath. You need to troubleshoot and check your water shower. If the water heater pilot stays lit after several trials, then you need to contact a professional technician who will help solve the problem.

The reason why your water heater keeps turning off

Water heater pilot won't stay lit

There are many reasons as to why your water heater keeps turning off and therefore you need to identify the reasons and ensure that you troubleshoot the problem. Here are the top reasons your pilot won’t stay on and the various method which you can adopt to fix the issue

  • Dirty pilot tube

If dirt and debris can collect in them pilot tube, then there are great chances that it’s going to lead to blockage of the flow of the gas. Due to this, the pilot does not get enough fuel to stay lit. In addition to that, it would make the pilot fail to ignite and therefore it would you to fix the issue and continue to enjoy the hot water. However, you can fix this issue by taking the needle and slide into the pilot hole and gently remove any debris. You need to repeat the same try for a couple of times depending on the debris in the tube. You need to proceed and light up the pilot and see if it works properly.

  • Obstructed thermocouple

Most of the old water heaters use the thermocouple as the primary operating organ. However, there is thermocouple which may end being obstructed. Therefore, it could be difficult to read the electrical current which is used to indicate whether the pilot light is on and off. The thermocouple has been designed to turn off gas supply anytime it detects the unlit pilot for all the safety precautions. If your thermocouple is not functioning properly, then you need to troubleshoot and identify the problem and develop the right solution for the issue. For instance, most of the obstructions are caused by dirt, and you can clean using the sandpaper. You need to fix this problem, but you should ensure the gas is off. It would ensure that your component is working properly and ensure there is an appropriate replacement.

  • Damaged Thermocouple

It is another major scenario which could happen, and you need to replace the pilot. For instance, the damage is likely to be in the form of the sensor being bent away from the pilot light or others may need a longer functional. You can fix this problem by examining the thermocouple and ensure at the end should lightly touch the flame when the pilots lit. There is some thermocouple which shows no signs of damages and is very clean, and therefore you need to test a multimeter. For example, if the reading is above 20MV, then the thermocouple is a relative good, and if it falls below that, then you need the clear the sign and ensure there is a replacement.

  • Main Control Valve

problems with water

If it is faulty in the central control, this could lead to the pilot failing to light off. It’s a very rare case, but if the main control valve has a problem, then the hot water tank won’t stay lit. The valve is likely to have seldom, and therefore you need to develop a solution for the control valve. You need to ensure that you replace it with other several from the toolset. If the control valve gets faults, then you need to consult with the technician, and he will be able to able to repair it. You should also consider changing the control valve altogether, and this would help cut all the cost, which are related valve.

  • Curved Thermocouple

Apart from the common dirt and other grime, a thermocouple can bent and this could lead to a point where it’s no longer functional. For instance, there are cases where the thermocouple may bent too far away from the pilot and this could lead the pilot failing to heat. All that you need to do when you found yourself in this situation is that you should ensure all the precaution and safety measure have been adhered and then ensure the issue has been fixed accordingly. Normally the flame should always flame when lightly touch the thermocouple or being close enough to heat the device. In addition to that you should ensure that you have a wrapping around the sensor.

  • Flex Tube issues

If the hot water heater does not stay lit even after troubleshooting approaches, then you need to check for all the flex tube issues too to ensure they are functional. The flex tubing is the tube which connects to the gas controller and also ensures there is steady gas stream. However, if the tube is kinked then it will likely to prevent any smooth operation or the flow of gas. You need to ensure there is good flow of the gas for the pilot to heat.

 Final thought

cat drinking water

Gas heater has been termed as one of the oldest ways of heating the water despite being used by many people for long time. The most frustrating thing is that there are times when the water heater pilot light won’t stay lit and therefore it could need you to troubleshoot the problem and fix it. Once you have identified the problem you need to ensure that the issues have been fixed by a professional technician. In the days to come there are major changes which need to be done to ensure all the issues which are related to water heater have been resolved.

Water heater pilot won’t stay lit FAQ


Why does my pilot light keep going out?

In this case likely you have a broken thermocouple in your gas furnace if not then indicator itself was died.

How do you know if you have a bad thermocouple?

You have a bad thermocouple If the flame lights and goes out.

Why does my gas heater keep shutting off?

In this case it could be due to low airflow. Need to clean it.

How long does a thermocouple last?

Usually it can work a few years but less then furnace

Should pilot light always be on water heater?

Yes, it should be. If you don’t see it probably something wrong.

How to fix shower diverter? Shower Repair Explained

Turning your shower on should be as easy the flip of the switch, but if your shower diverter has a problem, then you are likely to have difficulties to operates the shower. How to fix shower diverter? What most people don’t know is that you can repair your shower diverter quick and easy. In this article, we shall explore the various ways in which you can repair the diverter valve and continues to enjoy your shower.

 What is a water diverter valve?

It refers to a valve that diverts the flow of the water from the bathtub faucet direct to the showerhead. It helps facilitate you to have the shower and a bathtub in the same space, which is very important while taking your shower. Most of the shower diverters are controlled by a pin knob which you are supposed to pull. However, there are different type of shower diverter which you can use. Sometimes the diverter gate gets stuck and when you try to turn it on or pull it up and then it refuses to budge or makes squeaky. The highest chance is that it has accumulated some dirt and limescale and therefore you need to fix the problem.

How to repair a shower diverter?

shower

Once you realize the shower diverter is broken, you need to proceed and fix the problem. A broker shower diverter is likely to waste a lot of water which could increase the water bill and also limit the shower experience. You can follow the following steps and fix your shower diverter.

  • Remove the valve diverter.

You need to shut off the water first and turn the faucet on until that time when the water will stop to flows.  Seeping water is likely to mess your workplace, and this could make it difficult for you to fix the broken shower diverter. Once you have ensured, there is no water leakage, and then you can move to the next step. It would help if you were more careful while removing the valve diverter to avoid causing more damages.

  • Troubleshoot the diverter

You need to identify the main issue which needs to be fixed on the shower diverter since there are some which may not need much to get restored. For instance, there are some shower which needs to tighten the screw while others need more repair and therefore troubleshooting the problem is essential. Once you try to fix the diverter and the water continues to pour then you to get further and fix the problem.

  • Remove the old shower diverter.

How to fix shower diverter

You need to disassemble the shower diverter and remove all the part of the diverter, especially if your diverter has a rotating valve.  Ensure that you have unscrewed the nut of the diverter and also remove the entire valve and this would allow you to detect the problem.  You are likely to diagnose the problem and fix it if you open all the part and check the parts which could be causing the leakages.

  • Choose another new diverter.

Once you have removed the old diverter, then you need to replace it with the new shower diverter, and the most suitable thing is to ensure that you get in the store with the old diverter to get the right one. There are different types of shower diverter which have different valves, and therefore you need to choose one which is the best fit for your head shower. You need to get the best replacement from the reliable store which could ensure you get a reliable item.

  • Install the new shower diverter

You need to install the new diverter in your bathroom by ensuring that you have connected all the parts of the valve with each other.  You need to make good use of the wrench, and this would help to tighten the diverter valve by ensuring that you are more careful not to overtighten. In addition to that, you also need to adjust effectively and ensure the valve is placed in the right position to ensure there is a good flow of the water.

  • Test the valve

Once you have installed the valve, then you need to proceed and test the valve by turning the water supply back and then ensure that you engage the shower diverter. You need to ensure that you have directed the water flow to the showerhead and this would ensure there is no water leakage from the bathtub.

With the above steps, you will have successfully replaced the shower diverter and stop the water leakage. A broken shower in your house is likely to cause more damage to your house, and therefore you need an urgent solution for the shower problem. It’s important to note that there are water diverter valves which are located in the spouts and therefore it would be prudent for you to take out the entire spout off and get replaced with a suitable mechanism.

There is a quick check-up which you can undertake when you have your shower diverter having a problem which includes soaking the parts in a mixture of the vinegar and water for about 15 minutes. Then you will need to use the brush and gently scrub away and then rinse off thoroughly. There are times when the shower diverter could be clogged, and this could lead to damage to the valve, and once it has been cleaned, you can be able to use it.

Prevention of shower diverter to wear and tear

cat shower

To ensure that you reduce the strain and the wear on your shower diverter you need to undertake some measures which will be aimed to prevent the leakage which includes allowed the water flow from the tub faucet for some few seconds before you can turn off the water. In addition to that, it’s worth noting if you find it hard to replace your shower diverter by yourself then you need to hire a reputational plumber who would ensure that your shower valve is replaced well.

There are readily available tutorials in the YouTube and also Google, which you can always use and fix your shower diverter within some few minutes. For the two-valve or the three-valve bathroom spouts, you need to be more careful as it needs more care for you to replace them.

How to fix shower diverter FAQ


Can you repair a shower diverter?

Yes, you can if you feel like a pro it will be easy and a little more difficult if you are a beginner.

Can a shower diverter cause a leak?

Yes, it can be, infrequently, but not never. Call the master if you think that you can’t repair it alone.

What does diverter valve look like?

It’s always have a golden color. Do not confuse it.

Frigidaire Dishwasher Not Draining

Imagine if you just got up and wanted to do dishes, but your dishwasher is not draining. It would be awful if the water started to stink and make everyone in the house feel uncomfortable. If this issue makes the kitchen unbearable, you may need to call a dishwasher technician or company representative to fix your equipment. Hiring a specialist to repair the drainage system can be costly. The easiest way to fix the dishwasher is to do it by yourself. Repairing a drainage system is not as complicated as most people think. There are different models of frigidaire dishwasher but this can cause only minor changes to the repairing process. There are many factors that can cause a frigidaire dishwasher to stop draining. In this article, you will learn why your frigidaire dishwasher is not draining and how to fix it in the most efficient manner.

  • Fault in Drain Pump Motor
  • A Clogged Drain Hose
  • A Clogged Drain Valve
  • The Water Pump Belt
  • Fault in Garbage Disposer
  • Fault in Drain Solenoid
  • Faulty Check Ball
  • Fault in Pump and Motor Assembly

Drain Pump:

dishwasher

dishwasher

The drain pump is a motor in the dishwasher that uses an impeller to force water through the drain hose. If the pump stops running due to some reasons, you will find stagnant water in the frigidaire dishwasher unless you test the drain pump. You can use a multimeter to check the continuity of the drain pump motor to confirm that the pump is the actual cause of the frigidaire dishwasher draining problem. If there is no continuity in the motor or there is electricity but it does not work, then you should replace the drain pump. It can be done by using some magnetic screwdrivers and other common tools. The drain pump motor can not be repaired and if it is damaged then replacement is the only solution.

Drain Hose:

It is a connector between the dishwasher and the garbage disposer. If the drain hose of the frigidaire dishwasher is clogged, it could also stop draining. In this case, you can fix the problem by just removing it from the sink and dishwasher drain and cleaning it thoroughly. This issue can also be prevented by checking the garbage disposer and dishwasher branch regularly.

Drain Valve:

With the passage of time, drain valves can become clogged with debris, blocking the flow of water. If this is the problem then you just have to clean the valve. If it does not start working properly even after the cleaning process, it may be time to replace it as it cannot be repaired.

Water Pump Belt:

Dishwasher Not Draining

Dishwasher Not Draining

Not all but some dishwashers are equipped with water pump belts. The water pump belt may also break or fall off. In either case, the frigidaire dishwasher can stop draining. To determine if your dishwasher has a water pump belt you can start by searching for the model number and the place where the belt is located. If your dishwasher has one, you should remove the bottom panel and assess it. The belt should be placed at the bottom of the water pump motor and it should be replaced if it is broken or worn out.

Waste/Garbage Disposer:

The garbage disposers are equipped with a strong plug in the drain pipe. If the disposer is installed recently then there are possibilities that the plug is still intact and can be fixed easily. Keep the drain plug intact if you are not connecting the dishwasher with the garbage disposer. The plug should be removed if the garbage disposer is to be attached with the dishwasher.

If the waste disposer is installed for a long time then it may be possible that the disposer is full of waste and is blocking the water to drain. In this case, the disposer should be removed from the drain hose to clean it properly. You should make sure that the fitting in the garbage disposer and at the bottom of the drain hose is clean. These are the most common places where conflict is likely to occur if the frigidaire dishwasher is not draining.

Drain Solenoid:

Drain solenoid has to open the drain valve to get the water out from the dishwasher. If the drain solenoid does not open the valve, the dishwasher will not be able to drain water and you will need a technician to get it repaired. If it requires more than a minor repair then replacing drain solenoid is the most recommended solution.

The Check Ball:

Sometimes you look at the dishwasher and the water is draining but if you see after a while you will notice that there is water at the bottom of the frigidaire dishwasher. This may be due to the backflow of water from the dishwasher. The check ball prevents water from coming back and if this plastic check ball got stuck, it can result in the restriction of water drainage through the drain valve. You should use a screwdriver or any other suitable tool to release the ball and lubricate it.

Pump and Motor Assembly:

The role of the motor is to direct the impeller to drain water from the hose. The motor will run perfectly during the drain cycle if there is no obstruction. If it stops working properly and starts making noise then both pump and motor should troubleshoot and should be replaced if there is a major issue.

The Bottom Line:

The Bottom Line

The Bottom Line

Above mentioned causes and their solution can help you to fix the draining system but you should know the fact that all damages cannot be repaired. Prevention seems to be the best solution that will save you from major damages and will increase the life of your frigidaire dishwasher. Regular cleaning and periodic maintenance prevent you from falling into the hands of pseudo specialists, who offer you fake repairs at a very high cost. Make sure you never reach a point where you can’t fix your dishwasher by adopting a DIY (Do It Yourself) mechanism.

Frigidaire Dishwasher Not Draining – FAQs


Here are some frequently asked questions related to how tall is a story.

  1. How do you unclog a Frigidaire dishwasher drain?

    Need to remove the drain hose from both the dishwasher and the sink drain and clean it out. Careful, need to remove both. Then put it in again.

  2. Nothing helps me?

    Just double check our guide. If it not help, then no need to worry, call the master.

  3. How do you unclog a dishwasher with baking soda?

    Add the vinegar and baking soda solution to the dishwasher basket at the bottom. Let it sit for around 15-20 minutes and then pour in some boiling to the basket to clear away the clog. Need to do it regular. This is important, because it will help extend its lifespan.

  4. How long lifetime dishwashers?

    It depends on the dishwasher, but usually about 10 years.

How To Remove Great Stuff From Skin: A Comprehensive Guide

One of the most common ways to take care of cracks and gaps in the house is to spray them with some Great Stuff foam. Once the foam is sprayed, it should cure in a rather short amount of time and stick permanently to almost all surfaces, including your skin. Therefore, it’s probably not a bad idea to figure out how to remove Great Stuff from skin in case your sealing project gets messy.

In this article, you would be introduced to the characteristics of the Great Stuff foam along with the way to remove it safely and effectively. Helpful tips and tricks about the material usages are also listed down below, you should check them out to learn how to handle the foam.  After you get a clear understanding the foam tendencies as well as its applications, you could use the material to good effect without much effort.

Important Note: There are a couple of ways to get wet and dried Great Stuff foam away from your skin. Nonetheless, it’s widely advised that you avoid getting the material on your skin in the first place by wearing suitable protective equipment and clothing. In the usual case, the recommended setup is safety goggles, work gloves and clothes that cover all of your skin.

The Characteristics Of Great Stuff

Great Stuff sealant is a type of polyurethane foam that could expand to fill the shapes of gaps and cracks. Seals that utilize Great Stuff foam are completely airtight and water resistant so they are invulnerable to moisture, allergens, insects,…Because the foam adhere very well to wood, plastic, metal, masonry and other common surfaces, it could be used on a variety of sealing project.

For most of the time, Great Stuff foam would usually become rigid and tack-free within 5 – 10 minutes after being sprayed. After 8 hours, you could start scraping away the excess foam and that should be everything. Thanks to the foam color, it’s quite easy for you to detect its presence. The elasticity of the Great Stuff foam allows it to cope with a certain degree of movement and shifting within the structure without becoming undone.

How To Remove Great Stuff

Prolonged skin contact with Great Stuff foam could lead to issues like irritation, allergic reaction and probably even respiratory sensitization. Seek medical assistance right away if there are severed body reactions to the polyurethane foam.  

When The Foam Is Wet

After being sprayed, the foam should stay wet for a few minutes and this is considered to be the best time to remove the material. If Great Stuff foam gets to your skin, you have to promptly grab a piece of cloth and use it to wipe the sealant off.  Pay utmost attention while you wipe the cloth, you definitely don’t want to spread the foam further by accident.

To deal with the foam residue, you could use polish remover (with acetone), polyglycol-based skin cleanser and corn oil. After that, wash your skin with soap and a lot of water to remove the cleaning agent.  In the case everything goes smoothly, the foam should be no longer on your skin. Nonetheless, if some of the foam remains and become hardened, it’s the time to use other methods.

When The Foam Has Dried

Dried Great Stuff foam could not be removed by solvents and cleanser, you have to mechanically get rid of it For most of the time, pumice stone along with high-quality hand lotions or some petroleum jelly could take care of most of the cured foam. For stubborn foam residues, you should consider using abrasive material like sandpaper to eliminate them. It’s recommended to take thing easy here, you don’t want to cut your skin by mistake.

Great Stuff Application And Usage.

  • Because of the flammable nature of the foam and its vapor, you must not use Great Stuff around heater, furnaces, lighting fixtures and so on. Shut down all nearby ignition sources and open flame while you spray the polyurethane foam.
  • To reduce the accumulation of combustible vapor, you have to increase air circulation by opening all surrounding doors and windows.  In the case you want to spray the Great Stuff foam in a cramped and confined space, it’s advised that you wear a respirator.
  • Each Great Stuff spraying can is designed for one-time use only which mean you have to plan every detail in advance instead of improvising. It only takes around 2 hours after the last spray for the inside foam to seal the can and render it usable.
  • Great Stuff shall expand to fill the hollow space, therefore, you should only fill the gaps and cracks up to 50%. Overfilling would cause the Great Stuff polyurethane foam to expand too much and damage the structural integrity in the process.