Archive

Category Archives for "Kitchen Lighting Ideas"

Frigidaire Dishwasher Not Draining

Imagine if you just got up and wanted to do dishes, but your dishwasher is not draining. It would be awful if the water started to stink and make everyone in the house feel uncomfortable. If this issue makes the kitchen unbearable, you may need to call a dishwasher technician or company representative to fix your equipment. Hiring a specialist to repair the drainage system can be costly. The easiest way to fix the dishwasher is to do it by yourself. Repairing a drainage system is not as complicated as most people think. There are different models of frigidaire dishwasher but this can cause only minor changes to the repairing process. There are many factors that can cause a frigidaire dishwasher to stop draining. In this article, you will learn why your frigidaire dishwasher is not draining and how to fix it in the most efficient manner.

  • Fault in Drain Pump Motor
  • A Clogged Drain Hose
  • A Clogged Drain Valve
  • The Water Pump Belt
  • Fault in Garbage Disposer
  • Fault in Drain Solenoid
  • Faulty Check Ball
  • Fault in Pump and Motor Assembly

Drain Pump:

dishwasher

dishwasher

The drain pump is a motor in the dishwasher that uses an impeller to force water through the drain hose. If the pump stops running due to some reasons, you will find stagnant water in the frigidaire dishwasher unless you test the drain pump. You can use a multimeter to check the continuity of the drain pump motor to confirm that the pump is the actual cause of the frigidaire dishwasher draining problem. If there is no continuity in the motor or there is electricity but it does not work, then you should replace the drain pump. It can be done by using some magnetic screwdrivers and other common tools. The drain pump motor can not be repaired and if it is damaged then replacement is the only solution.

Drain Hose:

It is a connector between the dishwasher and the garbage disposer. If the drain hose of the frigidaire dishwasher is clogged, it could also stop draining. In this case, you can fix the problem by just removing it from the sink and dishwasher drain and cleaning it thoroughly. This issue can also be prevented by checking the garbage disposer and dishwasher branch regularly.

Drain Valve:

With the passage of time, drain valves can become clogged with debris, blocking the flow of water. If this is the problem then you just have to clean the valve. If it does not start working properly even after the cleaning process, it may be time to replace it as it cannot be repaired.

Water Pump Belt:

Dishwasher Not Draining

Dishwasher Not Draining

Not all but some dishwashers are equipped with water pump belts. The water pump belt may also break or fall off. In either case, the frigidaire dishwasher can stop draining. To determine if your dishwasher has a water pump belt you can start by searching for the model number and the place where the belt is located. If your dishwasher has one, you should remove the bottom panel and assess it. The belt should be placed at the bottom of the water pump motor and it should be replaced if it is broken or worn out.

Waste/Garbage Disposer:

The garbage disposers are equipped with a strong plug in the drain pipe. If the disposer is installed recently then there are possibilities that the plug is still intact and can be fixed easily. Keep the drain plug intact if you are not connecting the dishwasher with the garbage disposer. The plug should be removed if the garbage disposer is to be attached with the dishwasher.

If the waste disposer is installed for a long time then it may be possible that the disposer is full of waste and is blocking the water to drain. In this case, the disposer should be removed from the drain hose to clean it properly. You should make sure that the fitting in the garbage disposer and at the bottom of the drain hose is clean. These are the most common places where conflict is likely to occur if the frigidaire dishwasher is not draining.

Drain Solenoid:

Drain solenoid has to open the drain valve to get the water out from the dishwasher. If the drain solenoid does not open the valve, the dishwasher will not be able to drain water and you will need a technician to get it repaired. If it requires more than a minor repair then replacing drain solenoid is the most recommended solution.

The Check Ball:

Sometimes you look at the dishwasher and the water is draining but if you see after a while you will notice that there is water at the bottom of the frigidaire dishwasher. This may be due to the backflow of water from the dishwasher. The check ball prevents water from coming back and if this plastic check ball got stuck, it can result in the restriction of water drainage through the drain valve. You should use a screwdriver or any other suitable tool to release the ball and lubricate it.

Pump and Motor Assembly:

The role of the motor is to direct the impeller to drain water from the hose. The motor will run perfectly during the drain cycle if there is no obstruction. If it stops working properly and starts making noise then both pump and motor should troubleshoot and should be replaced if there is a major issue.

The Bottom Line:

The Bottom Line

The Bottom Line

Above mentioned causes and their solution can help you to fix the draining system but you should know the fact that all damages cannot be repaired. Prevention seems to be the best solution that will save you from major damages and will increase the life of your frigidaire dishwasher. Regular cleaning and periodic maintenance prevent you from falling into the hands of pseudo specialists, who offer you fake repairs at a very high cost. Make sure you never reach a point where you can’t fix your dishwasher by adopting a DIY (Do It Yourself) mechanism.

Frigidaire Dishwasher Not Draining – FAQs


Here are some frequently asked questions related to how tall is a story.

  1. How do you unclog a Frigidaire dishwasher drain?

    Need to remove the drain hose from both the dishwasher and the sink drain and clean it out. Careful, need to remove both. Then put it in again.

  2. Nothing helps me?

    Just double check our guide. If it not help, then no need to worry, call the master.

  3. How do you unclog a dishwasher with baking soda?

    Add the vinegar and baking soda solution to the dishwasher basket at the bottom. Let it sit for around 15-20 minutes and then pour in some boiling to the basket to clear away the clog. Need to do it regular. This is important, because it will help extend its lifespan.

  4. How long lifetime dishwashers?

    It depends on the dishwasher, but usually about 10 years.

6 Steps to Fix your Flooded Dishwasher

You own a dishwasher, but for some reason, it is not working. You open it up and see a flooded bottom. Even if the brand is a Frigidaire, Samsung, Whirlpool, or even a GE, it is possible to for it to break down eventually.

But we don’t want to wash all those dishes by hand, right? I have put together a guide to help you service your broken dishwasher all by yourself. If you are a beginner at fixing things, the steps below will be easy to follow, and will be applicable to almost all of the available dishwasher models.

Prepare the following things that you will need to fix your dishwasher:

  • Gloves
  • Flashlight
  • A lot of rags
  • A bucket for holding the flood water
  • Dishwashing soap
  • Sponge
  • A screwdriver (prepare different sizes as the screw sizes may vary)
  • Acid cleaner (optional)
  • Dishwasher manual (to locate where the parts can be found)

Before following any of the steps below, ensure that your device is turned off and unplugged. Second, scoop out the excess water in order to see the floor of the dishwasher. Most of the parts that need to be cleaned up or repaired are at the bottom, so removing the flood water is important. Drying it out with a rag will also help ensure you can see the parts clearly.

You should also use a flashlight in case the light in your kitchen is not sufficient. Getting someone to help you hold the flashlight will also speed up the process of fixing up your broken dishwasher.

You might want to check if your dishwasher has a warranty – that way, you can get it fixed for little or no cost at all, and less effort on your part! Also, be warned that some warranties may become void if the dishwasher was opened up or repaired by someone else aside from the maker (brand).

Enough chit-chat, let’s get our hands wet and get that dishwasher up and running!

Things that you need to know and do before troubleshooting your dishwasher:

  • Remove the drainage basket. You will need a screwdriver in order to do this. Clean the drainage basket with a sponge and dishwashing soap as needed.
  • Under the basket, there might be a “flap”. Dismantle this too, and as above, clean as needed
  • There might be some water in the drainage area, so you will want to dry that up too
  • Check the drainage area if there are any bits and pieces of leftovers. You will need to remove those to prevent clogging. With a soapy rag, you can clean this area up as needed. Dry it up once done.

Young Woman Cleaning And Fixing Dishwasher In Kitchen

Step One: Checking the Drain Pump

This is the most common cause of flooded dishwashers. The drain pump is one of the most important parts of the dishwasher, since it houses the motor which forces the water through the hose. If it does not work (i.e. no water pushed out), unfortunately, you can’t repair this, and you will have to replace it. You can contact your local dealer for a replacement drain pump motor in this case. If your dishwasher has a warranty, then this would be one of the best times to use it.

Coins in a drain pump filter

Step Two: Checking the Drain Valve

At times, leftovers get trapped in the drain valve, and thus inhibit draining. This is a very common occurrence, and happens over time. You can try and clear it by picking out the debris, or by dissolving it with an acid cleaner.

If you made sure that there is nothing else blocking the drain valve and it still does not work, you will need to replace the drain valve, since it is not repairable.

Step Three: Checking the Drain Hose

Another dishwasher part that may be blocked would be the drain hose. This is where the water passes through to push out the water used when running a cycle. To clean the drain hose out, you will need to dismantle it from both ends – the dishwasher itself and the sink drain.

You can pass a rope through the hose to try and dislodge the debris, or you can use a chemical cleaner to flush it out. If you don’t want to use a chemical cleaner, you can always attach it to a faucet, and force the waste out. Take note that this might just push the debris further in, so you will want to use your better judgment on what will work best to unclog the drain hose.

Workman attaches a drain hose to a sewage pipe

Pro Tip: Be very careful when handling the drain hose – the plastic or rubber that makes up the hose might be thin, so use the acid cleaners with care. Make sure that the acid cleaner you are using does not melt nor deform plastic or rubber. Acid cleaners should always be a last resort, and must be used with extra care.

Step Four: Stuck Check Valve and Check Ball

The check valve is the part which prevents the used water from going back up to the dishwasher. The check ball is a plastic ball within one of the tube like structures of the check valve. In some cases, the check ball gets stuck, and it should be as easy as freeing it up to get it working again.

Check and ball valve with selective focus on thread fittings

Depending on what dishwasher you have, it might be too small to see, so you might have to take some time looking for the ball. Make sure it’s the ball you are freeing up, and not another part of the check valve. Damaging the check valve might further the dishwasher problem. A good way to free up the check ball is by running some dishwashing liquid on it. It may help loosen it up. Try spinning the ball on its socket, and see if it helps free it up.

PRO TIP: It is always better to spin the ball than to try and pry it out. Prying out the ball might cause further damage.

Step Five: Troubleshooting the Garbage Disposer

There are two main reasons why the garbage disposer might be stopping the dishwasher from draining: first, it might be clogged; second, it might not be installed properly. The garbage disposer may be an optional installment for your dishwasher – you may or may not have this.

If it is clogged, again, you will want to remove all of the debris as much as you can. If the garbage disposer has been recently installed, it is possible that the drain plug may not have been removed. The drain plug is by default, attached, to prevent the water from just gushing out. Removing the drain plug should fix this.

Step Six: Faulty Water Pump Belt

The water pump belt is the least common of the problems, since not all dishwashers have it. It would be located near the motor. If the water pump belt is broken or worn out, you will need to purchase a replacement for this, since like most dishwasher parts, is irreparable.

PRO TIP: Return all the dismantled parts where you found them. Ensure that all the screws are placed securely, to avoid the parts from moving or vibrating about. Loose parts may cause further damage to your dishwasher. Once you have replaced everything, run a new full cycle on your dishwasher, and see if it now drains.

Final Thoughts

More often than not, stuck debris are the culprits of dishwashers failing to drain. After following the steps above and the dishwasher still fails to drain, it is possible that some of the parts we’ve discussed above may be broken or may have short-circuited. In rare cases of short-circuiting, it would be best to leave the repairs to a professional.

Now and then, make sure to clean out your dishwasher. Even if these machines make our life easier, it would still be our responsibility to check the efficiency of these appliances, and maintain it. The 6 steps above should address the most common causes of a flooded dishwasher. A single step may help solve the problem immediately. In some cases, you might need to follow all of the steps to get the draining system working.

We would love to hear feedback from you - feel free to let us know which step helped you get your dishwasher draining again!