Best Tips on How to Install Field Fence With T Posts

Are you a farmer or property owner? If so, then you understand the importance of creating a boundary to keep livestock in or unwanted predators out.

This might seem like a bit of a challenge, but it’s just a matter of building a strong fence. Have you been wanting to erect a fence using T posts but didn’t know where to start? Well, you’ve come to the right place for help.

This article takes a look at how to install a field fence with T posts. Keep reading to get the inside scoop.

Set Your Guidepost

The first step is to use a post driver to set a post as your guidepost. This is typically a corner of a new fence or an extension of an existing structure.

Be sure to set this post very carefully so that knobs all face outward and that each post is plumb.

Measure Out Your Next Corner

Once the guidepost is in place, stretch a measuring tape to check the distance to the next corner. When you’re ready to set the second corner post, you’ll want to make sure that the top of the post is level with the first post.

Don’t proceed with setting other posts into the ground until you’re certain the first two posts are level. Otherwise, the entire fence will be out of plumb.

Space Out the Remaining Posts

Now you’ll need to place the remaining posts on the ground. Space them about ten feet apart. If you’re worried about stability, feel free to set them closer together. The key is to make sure the posts are spaced evenly.

Set a Row of Posts

Go ahead and use your post driver to set a row of posts. Make sure they are plumb and the tops are level.

You should also have a T post puller.

Unroll Your Fencing Material

Next, unroll your fencing material and rest it against the posts. Make sure that the larger holes are at the top and the tighter weaving is at the bottom.

Attach the Fencing Material

how to install field fence with t posts1

Now you can start attaching the fencing material to the posts. Start at the top of the corner post, wrap a wire clip around the back the post, and place the ends of the clip around the wire on either side. Then squeeze the ends of the clip until it’s nice and tight.

Now secure your fencing to the first post using four more clips, spacing them down the length of the T-post.

Using a Fence Stretcher

You’ll need a fence stretcher to get the fencing as tight as possible. For best results, stretch the material taut with the stretcher and secure it to the T-post using wire clips. Repeat this process down the entire length of the fence.

Setting the Remaining Fence Rows

Once you have a row of T post fence set, repeat the process with however many sides you intend to build. The key is to take your time and make sure the posts are level so that the entire fence will look uniform.

A Property Owner’s Guide to How to Install Field Fence with T Posts

Building a fence doesn’t have to be complicated. Fortunately, this guide to how to install a field fence with T posts will help you get started.

Keep scrolling to discover more useful home improvement advice on our blog.

Keeping Grounded: The Best Type of Wood for Fence Posts

Click Here to Leave a Comment Below 0 comments