Monstera Adansonii Care | Everything You Need To Know About This Plant

Are you looking for expert help with monstera adansonii plant care?

Is it your goal to find easy-to-care-for evergreen houseplants, regardless of your level of gardening experience? Also known as Swiss cheese vines or monkey mask plants, Monstera Adansonii is an excellent option. What precisely is propagate Monstera adansonii, and how can you incorporate it into your yard or home? This article has the answers you’re looking for. Let’s take a look at monstera adansonii care and other things about this plant. Here you will get monstera adansonii care tips as well.

The Monstera Adansonii: A Brief Description And Identification Guide

The Scientific Name For This Plant Is- It’s called the Dansons Monstera

Various Nicknames- Adanson’s monstera, Swiss cheese vine, five-hole plant

What kind of plant are you talking about? A plant with blooms

Family- Araceae

Typical Adult Height And Weight- Somewhere between ten and twenty meters

Dimensions (width x height)- A vine may grow up to 13 feet long, while a houseplant will only grow 3 to 5 feet in height.

Soil Type- for adansonii care, potting soil with a peat foundation and granules; should have enough drainage.

Some other common names for the Swiss cheese vine are the Monkey Mask Plant and the Five Holes Plant. This unusual-looking houseplant is popular with homeowners because of its striking appearance. The Araceae family includes this particular flowering plant. In addition to North and South America, the West Indies, and Mexico, the Swiss cheese plant is native as well. If you want to care for monstera adansonii, the best places to look for it resemble a rainforest but have more sun and water.

Because of their leaf fenestration and trailing tendrils, these plants tend to be eye-catching. Indoor potted plants may give your house a South American feel if you want it to.

For swiss cheese vine care, when the plants become big enough, you can usually put them in a pot on a shelf or a hanging basket so that they may hang down. The Monstera Adansonii likes to climb when given the proper support, so keep that in mind while planning your next adventure!

Rather than growing as a draping plant, you may train these plants to climb like a vine by placing a moss pole or stake near them. Plant your Swiss cheese plant near a trellis if you want it to grow upwards rather than out to the side.

Your plant will be lovely and healthy, regardless of the technique you choose. Just make sure it gets enough attention.

The Monstera Adansonii’s Physical Characteristics (Swiss Cheese Plant)-

The following are some of the Monstera Adansonii’s most distinctive characteristics:


The stems of this houseplant are thick, green, and twig-like in appearance. A cylindrical aerial elongated axis with lengthy internodes may be seen on this stem.


The Monstera Adansonii’s highly unusual leaves, which seem foreign when seen via fenestrations, are another distinguishing characteristic. Each leaf’s surface has a leathery touch and feels to it.

The leaves are either oval or heart-shaped, with naturally occurring holes that are strange and uneven. It’s also an epiphyte, which means you may grow it as a climbing houseplant in a moss pole or on another plant.


In the wild, the blooms of this bisexual shrub range in color from cream to yellow. When planted as a houseplant or inside, it does not produce many flowers, if any at all.


Monstera adansonii, on the other hand, may grow very long or extremely tall. When grown indoors, they may reach a height of 3 to 5 feet in length, with leaves that can get a width of up to three feet. This plant may grow up to 13 feet in height when let to grow in the open.

The Swiss Cheese Plant’s Leaves Have Holes, But What Do They Mean?

Due to the fenestration process, the Monstera adansonii’s leaves have holes in them. Genetics dictates the fenestration process for most Monstera species, including the Monstera Adansonii.

For swiss cheese vine plant care, this process may also occur if a plant’s organs or portions die early in its lifespan. Fortunately, the Swiss cheese plant is not harmed by the existence of these holes. The presence of these openings is beneficial since it encourages quicker development. To put it another way, if there is no plant debris present, the plant doesn’t have to provide nutrients to specific leaf regions. You may rest easy knowing that these plants will be able to provide the vines with plenty of food. Such vines may benefit from it by getting the energy they need to develop.

Swiss Cheese Vine Care: How To Keep It Healthy (Monstera Adansonii)

It’s simple to do the monstera adansonii care. The reason for this is that houseplants may thrive and flourish in a wide range of environments.

The Amount Of Light Required

The Amount Of Light Required

Tropical jungles are where you’ll find this plant. It also necessitates the use of indirect yet bright sunlight. As a result, the ideal location for your Monstera adansonii garden is beside a window that faces east or west. Since these locations allow for many hours of daily sunshine without excessive direct light exposure, the plant is the reason for this phenomenon.

Also, keep in mind that although Monsteras, like the Adansonii, prefer bright settings, they may still thrive in fewer lit areas. As a result, they’re excellent low-light plants for locations with limited access to sunlight, such as workplaces and rooms with a north-facing orientation. The Monstera Adansonii’s holes may not develop correctly if placed in a location with little light. To be on the safe side, try to keep it out of direct sunlight if at all possible.

Requirements For Water

Watering your Swiss cheese vine properly is critical to its success. The most crucial advice for watering the Monstera adansonii is to wait until the top inch or two of the soil is dry before watering.

When watering, be sure to fill the container to the soil’s top with water and let it sit there until the water has completely drained away. Wait till it’s a little bit dry before going through the procedure again.

To avoid problems in the future, remember these straightforward guidelines for watering your Monstera adansonii:

It’s essential to have plenty of drainage holes in the container or pot if you want the soil to stay dry. If possible, choose a soil that drains well and doesn’t store a lot of water.

Be aware that common Monstera illnesses, including yellow leaves, root rot, and brown leaf patches, are frequently caused by improper watering. Be sure to follow these instructions carefully.

Requirements For The Soil

The Swiss cheese or Monstera adansonii plant prefers a peat-based potting mix as its ideal soil type. As a result, it does not have to worry about getting wet.

Potting mix made of one part perlite, one part peat, and four parts pine bark is another option. Using peat in your planting mix absorbs weight and releases it over time as needed for the plant while allowing surplus to drain. Pine bark and perlite, when used together, may aid in the drainage of excess moisture. When it comes to pH levels, a slightly acidic to alkaline balance is ideal. When cultivated on soil with a pH level between 5.5 and 7.5, the plant also tends to perform very well.

Requirements With Regards To Temperature

Because it’s classified as a tropical rainforest plant, Monstera Adansonii can tolerate temperatures up to around 75 degrees Fahrenheit. A temperature of 70 to 75 degrees Fahrenheit is ideal for them.

Avoid placing the Monstera plant near radiators or draughts, particularly in the winter when temperatures drop below 55 degrees Fahrenheit. Also, remember that monstera adansonii care may be complex in the winter and summer because of the extreme temperatures.

The reason for this is that both heating and cooling systems in homes may cause temperature swings. Additionally, cooling or heating your house may cause the air to become dry. Maintaining appropriate humidity will allow your indoor plants to flourish throughout the season.

Prerequisites For Humidity

As long as the soil is moist but not wet, Monstera adansonii may thrive in extreme humidity. If this is the case, the bathroom and kitchen are two places in your house where these plants may be placed.

To do the monstera adansonii care growing these plants in a naturally humid environment is a brilliant idea. Water sprayed on the surface from time to time is another option. Humidifiers may also help you keep the lushness of your plants’ foliage by increasing the humidity in the air around them.


For monstera adansonii care use just the amount of fertiliser the Monstera Adansonii can tolerate when it comes to fertiliser. Avoid fertilising it for the first six months after planting the seedlings if you can help it.

The finest fertiliser to use is a 20-20-20 liquid when the time comes. The plant has to be well watered after repotting, and then you should wait for one to two weeks before feeding it with a general-purpose liquid fertiliser once a month. This should aid in the establishment of the plants’ root systems.

Propagation Of Monstera Adansonii

In the same way as other vines, propagating Monstera adansonii is a fast and straightforward procedure. Soil or water may be used for propagation. Even if you keep this plant in water permanently, it will grow slower than replicate it on earth.

Exactly How Can You Grow A Plant In Water?

Following these methods will allow you to propagate Monstera adansonii from seed in water successfully:

Remember that nodes are the unique places on the plant where new roots will grow if you haven’t heard of them before. Additionally, there should be no submerged leaves in the pond or lake. After that, place the piece of wood in a location where it will be well-lit by natural or artificial means.

For monstera adansonii care, keep an eye on the water and replace it if it turns cloudy – Refill the glass with water if the level falls below the desired amount. Within a week or two, you may see a few small roots poking through the surface. When the cutting’s roots have grown to about an inch in length, you may transfer it to a new, permanent pot. Generally speaking, a root length of 2 to 3 inches is sufficient for the transplantation. For the cheese plant care, cutting should be watered and then provided with the necessary plant care once it has been transferred.

Wrapping Up

The hardiness and disease resistance of Monstera adansonii is remarkable. That said, overwatering is a common cause of illness in this plant. By only watering it when the surface is dry, you may prevent similar illnesses and issues in the future. In addition, the potting media must be able to drain well.

Spider mites are the pests most often seen on Monstera adansonii. Look for thin webs on the leaves to see whether they’re there. Mealybugs may be found in the stem joints of this plant, so keep an eye out for any white fluff.

Take care of any pest infestations you find since they may harm the plant and spread to your other treasured houseplants if left untreated. If this is the case, insecticidal soap or natural neem oil solution may eliminate the houseplant pests and bugs organically. So follow this monstera adansonii care guide.

Thank you for reading!

Click Here to Leave a Comment Below 0 comments