How to Install a Sprinkler System for Your Lawn

Did you know that American lawns currently occupy thrice as much space as irrigated corn?

The love affair with well-manicured lawns among Americans dates back ages ago. Today, at least 40 million acres of American land comprises of lawns of grass turfs.

Keeping your lawns well-manicured can be a costly affair. This is especially so considering the amount of water needed to keep your lawns green and glowing. Most Americans don’t know that there’s no need to water lawns manually with a sprinkler system.

Once you understand how to install a sprinkler system, you won’t have to face the frustrations and times wasted trying to water your lawn. This article introduces you to the unique application of a sprinkler system for the best lawn care.

Here’s how to install a sprinkler system for your front yard.

Step 1

The first step in installing a sprinkler system for your home garden involves mapping your lawns to identify the specific flag spots you’ll mount your sprinkler heads. You may place a stick or a flag at every sprinkler location where you wish to have a watering point for your lawn.

While mapping your sprinkler’s line in the layout, it’s critical to consider all the gas lines, power lines, and cable lines. This will minimize the risk of interference with existing utility lines. Mapping will help you have a clear plan on the lawn’s layout to ensure that each part of the lawn receives adequate irrigation.

Step 2

The next step involves digging trenches that will help channel the water through the lawn. It would help to use a string when setting up the trenches.

You can start by marking the sprinkler locations with a string to help you follow through with the connection. A typical trench ranges between 6-12 inches in depth.

You may also need to drill the trenches using a piece of PVC, which is long enough to go under the walk. This part may be delicate, which means that you need to take time and find the slip-female thread adapter that will fit and attach to a hose.

It’s also important to use a slip-male thread adapter to connect to a jet spray nozzle. It would help if you also considered going for powerful centrifugal pumps to allow for adequate pressure during the lawn irrigation process.

This step is important given that well-fitted trenches are the cornerstone to proper irrigation. You might need to use a power trencher to ensure that the water channels fall in place—the other important step in the process of burying the pipes.

A lawn that has properly set out pipes tends to flourish. The only thing you need to have is enough space between valves on the manifold. This will make the process of replacement easy if you ever need to replace or relocate the sprinkling system.

Step 3

Have you been wondering how to install a sprinkler system from scratch? Once you have set up the pipes and buried them properly, the next step is to hook up the water supply. A proper water supply system should also adhere to the local code set in your specific location.

How to Install a Sprinkler System for Your Lawn 2

Step 4

The assemblage of the valve manifold should be the next step. You can start by assembling the PVC pipes and the poly pipes. Other items such as the PVC cement and the primer are also important when fitting the valve manifold.

When assembling the valve manifold, you need to avoid having trouble with the water supply. One end of the valve manifold should join the main water supply line to complete water channeling. It would be best if you also clamp and tighten the components to secure the water supply.

The other end of the manifold connects to the PVC pipe. A ¾” PVC pipe is the best when laying a secure piping system for the mainline. You can then attach risers using 90-degree connectors at every flag that you set during the first step.

The risers will play an important role in holding the sprinkler heads in place once the setup is complete.

Step 5

The next step should be to install the sprinkler heads. It’s important to understand the irrigation needs of the lawn and the landscape. Before installing the sprinkler heads, ensure that you flush water through the system to remove any debris.

It would be prudent to go for high-pressure sprinklers or guns to ensure the best outcome.

It might be problematic if you install the sprinkler heads while the pipes have a partial blockage. Once you clear the debris, the sprinkler system will begin to work with greater efficiency. Once the trenches are clear, you can then proceed to install the sprinkler heads.

Ensure that you level the sprinkler heads to rise above the soil level. If your region is prone to heavy rains, ensure that the sprinkler heads are tightly in place to avoid displacement.

Step 6

The last step on how to install a sprinkler system should be putting up the control system. A controller plays an important role when setting up controls on the lengths and frequency of watering. It would also help to set up the controls in line with the pre-set manufacturer’s specifications.

The controller should be the last thing you add to the system. Once this is in place, you can connect the water supply to the main system line. You should then check to see that the system is working on the entire lawn.

This Is How to Install a Sprinkler System

When taking care of your lawn, you need to consider how you’ll water the grass and keep the turf looking fresh and green. In the past, homeowners had to water their lawns manually to keep the front yard well-manicured. However, things have changed over time.

Using sprinkler systems can help you save time and energy. You can control the length and time within which the system runs. If you have been wondering how to install a sprinkler system, then these six steps should help you get there.

Hominenjoy.com is your one-stop-shop for all your construction, security, electrical, plumbing, exterior, and interior blogs. Keep reading for more.

Thank you for reading!

Click Here to Leave a Comment Below 0 comments