Basement sewage pump maintenance

By: John | Date Posted: October 31, 2022

A sewage pumping station can offer various benefits.

It is responsible for keeping water from your basement when there is a storm or possible flooding.

Best 5 Basement sewage pump maintenance:

However, even the best system requires regular maintenance to operate at its best.

Therefore you must know how to go about maintaining your sewage pumping station.

There are several simple preventative measures that you could take to keep your sump pump in good condition.

Sewage Ejector Pump Applications

Sewage Ejector PumpSewage pumps may not get the credit they deserve for carrying away all the dirty, bubbling, toxic sludge and pumping it out to a septic tank or city sanitary system without us ever seeing, smelling, or handling it. Regardless of that modern miracle, there are two primary applications where sewage ejector pumps are best used: basement bathrooms and septic systems.

Basement Bathrooms

Basement BathroomThe most common application for sewage pumps is installing a bathroom in the basement. Because the basement is below-grade and usually situated below the sewage line entrance, a sewage pump is needed to pump waste and water up and out of the house. 

Once a sewage pit is dug out in your basement, installing a sewage pump is similar to a traditional sump pump. The main difference is that you will need a vent pipe running out of your home to remove the gas and odor that occurs as a byproduct of waste. Sewage pumps can have 2-3 times the output of a regular sump pump, but they aren’t intended for the same purpose.

Septic Systems

A septic field is the other option for homeowners without access to public sewers. In this case, a sewage pump is used to help break down and pump the waste out of the house and into the septic tank, which is later emptied by a septic service. 

Getting a sewage pump made with heavy-duty materials like cast iron should ensure a long and reliable life for your sewage pump. If you’ve ever installed one, you know it can be a dirty, smelly job, so the less often you need to do it, the better. Sewage pumps are great for this application because they have a larger intake to pass solids.

Sewage Ejector Pumps vs. Sump Pumps

Man-Holding Sump Pump Over PitWhat separates sewage pumps from ordinary sump pumps is their ability to handle waste solids, not just greywater. Although they’re not designed to pump large volumes at a time, sewage pumps are built with heavy-duty, cast-iron materials and components to withstand the worst elements over time.

 You can use a sewage pump in a sump pump application if your sump pit often fills with small debris, and your system can manage significant horsepower (HP) and gallons-per-hour (GPH) loss. However, you can’t use a sump pump for a sewage application because sump pumps can’t pump waste solids or debris that moves through sewage pits. 

Sewage Pumps vs. Grinder Pumps

Grinder Pump BladesGrinder pumps operate similarly to sewage pumps with the added benefit of having metal blades that shred everything being sucked through the pump. Sewage pumps are perfect for most residential homes, so think of grinder pumps as the equivalent for commercial applications.

Grinder pumps are extremely popular (sometimes necessary) in commercial buildings like bars, restaurants, hotels, and other municipal buildings with public access to sinks, drains, or toilets. Bartenders and dishwashers are often pressed for time when cleaning dishware and drinkware. Any food or stray garnishes that accidentally flush down sink drains won’t be a problem for a properly installed grinder pump.

Similarly, hotel property managers and landlords prefer grinder pumps simply because people tend not to care what they flush down toilets. Grinder pumps give you added security that nothing will clog your drains and cost you expensive repairs and inconveniences. 

Conclusion

Carrying out regular maintenance is of the essence for a sump pump system. While you might be used to waiting for some distinct problems to emerge to take action, this is not recommended. It is better to address a minor problem than wait for it to become a major fault, which will cost more money or even be beyond repair. It is also important to be aware that a sump pump will need to be replaced over time. The average use of a sump pump is generally between 7 and 10 years. It is recommended that you carry out routine checks yourself and have a professional check out your sump pump for an annual service.

1. Zoeller Waste-Mate 267-0001 Sewage Pump, 1/2 HP Automatic – Heavy-Duty Submersible Sewage, Effluent or Dewatering Pump

Zoeller Waste-Mate 267-0001 Sewage Pump, 1/2 HP Automatic – Heavy-Duty Submersible Sewage, Effluent or Dewatering Pump

Specifications

  • Brand: Zoeller
  • Color: Green
  • Material: Cast Iron

Zoeller is one of the most popular sump pump manufacturers on the market. Their line of pumps is some of the best and most dependable for household use, but choosing the right model can be confusing with many similar pumps.

Zoeller Waste-Mate 267 is heavy-duty submersible sewage, effluent, or dewatering pump with 1/2 HP. Ideal for residential & commercial use; Passes 2″ spherical solid waste with plastic impeller.

Conclusion

Float-operated sewage pump with a 2-pole mechanical switch & non-clogging vortex impeller design. Durable cast-engineered construction utilizes ASTM Class 25 cast iron for the switch case & pump housing. Automatic discharge with integral float switch is completely submersible, watertight, & dust-tight.

Zoeller Waste-Mate 267-0001 Sewage Pump
  • Zoeller Waste-Mate 267 is a heavy-duty submersible sewage, effluent, or dewatering pump with 1/2 HP
  • Ideal for residential & commercial use; Passes 2" spherical solid waste with plastic impeller
  • Float-operated sewage pump with a 2-pole mechanical switch & non-clogging vortex impeller design
  • Durable cast engineered construction utilizes ASTM Class 25 cast iron for switch case & pump housing

Pros

  • To be honest, I didn’t need a septic pump. My application only called for an effluent pump, just bacteria-laden water.

Cons

  • This pump is usually a bit more expensive than the “Plastic” models.

2. Acquaer 1/2HP Submersible Sewage/Effluent Pump, Cast Iron, 115V 6000 GPH Automatic Tethered Float Switch, Sump Pump for Septic Tank, Basement, Residential Sewage, 2” NPT Discharge

Acquaer 1/2HP Submersible Sewage/Effluent Pump, Cast Iron, 115V 6000 GPH Automatic Tethered Float Switch, Sump Pump for Septic Tank, Basement, Residential Sewage, 2'' NPT Discharge

Specifications

  • Brand: Acquaer
  • Color: Black
  • Material: Cast Iron

1/2 HP submersible sewage ejector pump features an efficient oil-filled split capacitor motor with high flow. It can pump up to 6000 GPH or lift water up to 27ft vertically, perfect for residential sewage and septic systems. It can work in harsh environments and offer long service life. Adjustable mechanical float switch automatically turns on/off the pump depending on the water level in the sump basin or septic pit. A Standard 10′ power cord with a piggyback plug allows the automatic operation of this electric sewage pump. 

Conclusion

Built-in automatic thermal overload protection will prevent the motor from overheating and burning. When the pump is dry running, it will shut off automatically to protect the motor. Fully immerse the pump before startup and prevent it from freezing in cold winter. They are designed for residential and commercial sewage & dewatering, such as sewage systems, septic tanks, waste water drainage, sewer, and basement flooding. 

Acquaer 1/2HP Submersible Sewage/Effluent Pump
  • Great Performance: 1/2 HP submersible sewage ejector pump features efficient an oil-filled split capacitor motor with high flow. It can pump up to 6000 GPH or lift...
  • Auto/Manual Operation: Adjustable mechanical float switch automatically turns on/off the pump depending on water level in sump basin or septic pit. Standard 10'...
  • Durable & Clog-resistant Design: This heavy-duty dirty water pump is equipped with rugged cast iron casing, reinforced engineered non-clogging vortex impeller and...
  • Overheat Protection: Built-in automatic thermal overload protection will prevent the motor from overheating and burning. When the pump is dry running, it will shut...

Pros

  • Installed the pump easily, no issues so far.
  • I’ve used this pump for over two years, and it works perfectly.

Cons

  • This thing weighs a ton and is not fun to put out of the pit in my basement.

3. Superior Pump 93501 1/2-Horsepower Cast Iron Sewage Pump with Tethered Float Switch

Superior Pump 93501 1/2-Horsepower Cast Iron Sewage Pump with Tethered Float Switch

Specifications

  • Brand: Superior Pump
  • Material: Cast Iron

Superior Pump builds pumps that are truly Built to Last and are 100 percent factory-tested. Superior Pump uses quality components, including solid copper motor windings, heavy-duty stainless steel jacketed shaft seals, double o-ring seals on a motor plate, and electronically controlled split capacitors. Superior Pump model 93501, 1/2 HP cast iron submersible sewage pump with tethered float switch, will pump up to 4800 gallons per hour. Equipped with a 2-inch NPT discharge, it will handle up to 2-inch solids and features a non-clogging vortex impeller.

Conclusion

1/2 HP Sewage pump moves up to 4,800 gallons per hour; the pump will lift water up to 25′ vertical height. Rugged cast iron construction; 10′ cord length. Tethered float switch automatically turns the pump on/off. 2-inch NPT discharge will handle up to 2-inch solids and features a non-clogging vortex impeller. Superior Pumps are Built to Last, engineered with quality components, and 100% factory-tested.

Sale
Superior Pump 93501 1/2-Horsepower Cast Iron Sewage Pump
  • 1/2 HP Sewage pump moves up to 4,800 gallons per hour; pump will lift water up to 25' of vertical height
  • Rugged cast iron construction; 10' cord length
  • Tethered float switch to automatically turn the pump on/off.
  • 2 inch NPT discharge, will handle up to 2 inch solids and features a non-clogging vortex impeller

Pros

  • The low price concerned me, but the reviews were good, and I took a chance and had no regrets.
  • The pump worked wonderfully. We used it to pump out a retaining wall.

Cons

  • Nowhere in the installation instructions does it mention drilling an air hole. 

4. RainBro 3/4 HP Cast iron submersible sewage pump with 10 ft. piggy back tether float switch, Model# CSE075

RainBro 3/4 HP Cast iron submersible sewage pump with 10 ft. piggy back tether float switch, Model# CSE075

Specifications

  • Brand: RainBro 
  • Color: Black
  • Material: Cast Iron

3/4 hp; max. The flow rate is 6400 gallons per hour; the pump will lift water up to 29′ of vertical height. 2 in. discharge capable of handling up to 2 in. Solids. Rugged cast iron construction with 10′ power cord length. Piggy Back Tether float switch cable length is adjustable for automatic operation.

Conclusion

This sewer ejector pump is ideal for basement or below-grade installations, the most common application is for a septic system or sewage pit. The RainBro Sewage pumps are equipped with 10ft piggyback float switch, a 2-inch FNPT discharge for easy installation, 2 in. discharge capable of handling up to 2 in. Solids.

RainBro 3/4 HP Cast iron submersible sewage pump
  • GREAT PERFORMANCE - 3/4 hp; max. Flow rate is 6400 gallons per hour; pump will lift water up to 29' of vertical height.
  • HIGH CAPACITY - 2 in. discharge capable of handling up to 2 in. Solids.
  • DURABLE - Rugged cast iron construction with 10' power cord length.
  • AUTOMATIC OPERATION - Piggy Back Tether float switch cable length is adjustable for automatic operation.

Pros

  • Very quiet and quick to empty the crock
  • The pump is good value for money. It was hardwired and waterproofed. Save money with this pump. The longevity of the pump has yet to be determined.

Cons

  • Tried to use this as a pond pump. It failed after a couple of months. It slowly lost head and performance until it just quit pumping altogether.

5. Wayne RPP50 Cast Iron Sewage Pump with Piggy Back Tether Float Switch, Black

Wayne RPP50 Cast Iron Sewage Pump with Piggy Back Tether Float Switch, Black

Specifications

  • Brand: Wayne
  • Color: Black
  • Material: Cast Iron

Wayne’s RPP50 1/2 hp sewage pump pumps up to 6200 gallons per hour with 5 feet of lift. This pump is manufactured with a durable cast iron motor, pump housing, and a replaceable piggyback tether switch for automatic or manual operation. The RPP50 can pass 2-inch solids and is perfect and ideal for below-grade installations.

Conclusion

Flow rate is 6200 gallons per hour; 3240 gph at 10 ft. Of discharge lift. Durable, cast iron submersible sewage pump. 2 in. Npt discharge capable of handling up to 2 in. Solids. Ideal for basement or below-grade installations. The bottom suction design passes solids up to 2 inches large.

Wayne RPP50 Cast Iron Sewage Pump
  • 1/2 hp; max. Flow rate is 6200 gallons per hour; 3240 gph at 10 ft. Of discharge lift
  • Durable, cast iron submersible sewage pump
  • 2 in. Npt discharge capable of handling up to 2 in. Solids
  • Ideal for basement or below grade installations

Pros

  • Excellent quality and quick shipping for a hard-to-find item.
  • Wayne has always had a great reputation for making quality pumps.

Cons

  • This pump was professionally installed by a plumber with 30 years of experience.

Best 5 Basement sewage pump maintenance:

Thank you for reading!

John
 

Click Here to Leave a Comment Below 0 comments